81.And now, we will chamfer the edge of the button . Select the edges, then use the chamfer tool to chamfer them. Use the same amount as me, because I took some time before to check what is the best amount for chamfering the this edges. We will start with the corners, then with the entire edge :
82.I will give you a hint. We will add more edges on this step because it’s a big distance between the horizontal edges and this ruins the sharpness of the corners. We will not add only on the button but also in the sides because if we will add only on the button, the rounded gap between the button and the case will not be the same. So , select the same edges and use the “Connect” tool to add the same edges as me and don’t forget to check my amounts :
83.Now it will be useless to explain the same thing for each button. I will post some images to help you but I am sure that you will be able to model the other side button by your own. If you are stock, don’t forget that you can leave a comment and I will help anyone.
84.As you can see , we used the same steps and the same amounts as before . Let’s move forward: now we will make the other side . We will make the top and the bottom later. Be careful to not mess up the other side of the phone. Use 2 viewports to see if you are choosing the right edges :
85.Now we will make the last button on the sides. We will need to split that big part in 3. This is what we will do in the first steps. The steps and the amounts are the same. You should follow the images and if you don’t know how to do something, watch how we did the first button on the side. And yet, if you are stuck, leave a comment and I will help anyone :