BMW Z4 M – car modeling tutorial

90. Before adding the thickness, you should check something. Check if you have parts like below,normally it happens at the intersection of 5 or more edges. You need to weld those 2 vertices using weld, and not target weld :

91. Before chamfering the edges between the trunk and the spoiler and between the fender and the spoiler, check the image to see how you should chamfer the edges, because we will chamfer the edges of the headlight in the same time :
By the way, do not forget what chamfer you will on this step because you will need the value a little bit later

92. Now use the same value to chamfer these edges from this corner of the tailight

93. I forgot to tell you that we also need to split the hood from the rest of the body (obviously) :

94. We also need to split the door from the rest of the body, so , select these edges then split them. After splitting the edges you can detach the door from the rest of the body for a better work space

If you really appreciate our work and want to help us to maintain the website alive you can help us with a small donation.
forum-banner
This post was written by

4 Comments on "BMW Z4 M – car modeling tutorial"

  • brock

    Greeeeeeeeeeeeeeet
    thanks for your great and perfect tutorial
    :)

    • I am glad you like it :) . Don’t forget to check the Ford Escort series :) . Its better than this one 😉

  • nakul

    what tool have you used to start the bumper of the car ?

Leave a Reply