BMW Z4 M – car modeling tutorial

60. Now just follow the line of the blueprint

61. Select the new edges (the selected one) then hold the shift button and drag them a little bit to the interior of the car :

62. Because this is a different object I have detached it. Select the polygons which are forming the seal, then press the detach button :

63. The next object made was the side window. Use the “Connect” tool to connect the upper and the lower edges of the seal then add some extra edges using the cut tool if necessary and be sure that you will have a nice rounded shape of the window and not a straight one. Hide everything except the seal for a better view and control :

64. Don’t forget to detach the window from the seal :

65. Use the dimensions from the blueprint to make the support for the mirros. Its just an extruded triangle and don’t forget to chamfer the sharp edges with a very small amount :

If you really appreciate our work and want to help us to maintain the website alive you can help us with a small donation.
forum-banner
This post was written by

4 Comments on "BMW Z4 M – car modeling tutorial"

  • brock

    Greeeeeeeeeeeeeeet
    thanks for your great and perfect tutorial
    :)

    • I am glad you like it :) . Don’t forget to check the Ford Escort series :) . Its better than this one 😉

  • nakul

    what tool have you used to start the bumper of the car ?

Leave a Reply